Mgbaaka NJ 12.7mm Site na Mgbaaka Mbupu Bore - Mpaghara 12 5A/10A, 380VAC, 300rpm, IP51, Njikọ Rotary Oghere
Nchịkọta
Mgbaaka slip nke DHK012-12 through bore nwere ezigboOghere etiti Ø12.7 mm (0.5″)Maka njikọta shaft-, pneumatic-, hydraulic- ma ọ bụ cable-pass-through. Site na kọntaktị eriri-brush dị oké ọnụ ahịa na modular ring stack, ọ na-enye obere mkpọtụ + nnyefe mgbaàmà maka sistemụ rotary nwere oke oghere nke enweghị ike iji mgbanaka siri ike nke shaft slift.
Nkọwapụta Isi
| Paramita | Uru |
|---|---|
| Dayameta dị n'ime (Mgbapụta) | 12.7 mm (0.5″) |
| Sekit | 6 / 12 / 18 / 24 (ndabara 12) |
| Ugbu a kwa mgbanaka | 2A (mgbaàmà) / 5A / 10A (nhọrọ) |
| Voltaji a tụrụ anya ya | 0–380 VAC/VDC (440V / 600V nhọrọ) |
| Ọsọ Kachasị | 300 rpm (ruo 600 rpm ahaziri) |
| Ihe Kpọtụrụ | Alloy ọla edo / ọla edo, ahịhịa eriri ọtụtụ isi |
| Nguzogide Ike | < 0.01 Ω |
| Mkpọtụ eletriki | ≤ 5 mΩ |
| Nguzogide Mkpuchi | ≥ 500 MΩ @ 500 VDC |
| Ike Dielectric | 1000 VAC @ 50 Hz, 60 s |
| Ihe Ụlọ | Aluminom Anodized |
| Waya ndu | Teflon AWG16 / AWG22 / AWG26, 300 mm ndabara |
| Ọkwa Nchedo | IP51 (IP54 / IP65 nhọrọ) |
| Okpomọkụ Ọrụ | -40°C ~ +80°C |
| Ụdị Nwụnye | Mkpọchi shaft ma ọ bụ flange, taabụ mgbochi ntụgharị na stator |
| Ndụ Ogologo | Mgbanwe nde iri abụọ na ise, enweghị mmezi |
Atụmatụ Nhazi
- Ezigbo oghere etiti, ntachi obi oghere ±0.05 mm, dabara na ogwe ọkọlọtọ 1/2″
- Ike + mgbaama agwakọtara (RS485, koodu, CAN, Ethernet nhọrọ)
- Ibu torque dị ala, dị ire ụtọ maka nkwonkwo ndị na-akwali servo
- Enweghị mmezi, ọrụ ọrụ rev 20+ nde
- Nhazi ọpụpụ ndu Rotor/stator (axial ma ọ bụ radial)
Ngwa Ndị A Na-ahụkarị
- Nkwonkwo aka robot na modulu nkwonkwo
- Tebụl nta na-agbanwe agbanwe, tebụl ndị na-agbanwe agbanwe
- Gantry onyonyo ahụike, isi ọkụ ịwa ahụ
- Nkwakọ ngwaahịa, akara aha, na igwe mkpuchi
- Igwe CCTV pan-tilt, pedestals antenna, na atụgharị ngosi
Dee ozi gị ebe a zitere anyị ya
